TC-Q5600 Wired Interpretation System

TC-Q5600 interpretation system offers a wired flushmount solution for multi-channel simultaneous interpretation and language ditribution. Flush channel selection unit offers 6 channels for headphone listening.

Major system component parts:
Central control unit, extension unit (optional), interpreter console, channel selection unit, connector(conjuntion box).

Channel Selection Unit
TC-Q5600

The wired flushmount channel selection unit provides high immunity from interference and high security against unauthorized listening. Each unit comes with headphone jack and volume control so that the delegate can hear any selected channel on a personal headphone, and adjust volume level for comfortable listening.

Features:
Simple and stylish look
30000V ESD protection circuit design
Waterproof and dustproof design

Basic functions:
6 selectable channels for interpretation
Loudspeaker volume level can be adjusted individually, or centrally by CCU and displayed on LCD.
Selected channel number is shown on LCD.

Connector CON-5600

The CON-5600 connector is designed to connect control units to function modules including discussion unit, channel selection unit, flush voting unit and/or loudspeaker for power supply and communication signals.

Interpreter Console
TC-F06

Features:
Digitally-controlled workstation designed for 6-channel simultaneous interpretation system
LCD screen to display the following information:
1) Channel selection and confirmation
2) Incoming/outgoing channel number
3) All the occupied channels
4) Channel number of this unit
5) Previous and present operation time
Two types of microphone can be used
1) Gooseneck microphone
2) headset boom microphone
Built-in loudspeaker with volume level control. Loudspeaker is automatically switched off when the microphone is turned on.
A/B/C pre-select incoming channels for relay interpretation.
A/B pre-select outgoing channels for normal interpretation and retour interpretation
Two outgoing channels can be used for normal interpretation and retour interpretation
Automatic channel interlocking function prevents the interpreters from using the same outgoing channel.
SLOW key to alert the current speaking delegate to speak slowly. When the key is pressed, the speaking delegate's microphone red ring luminant will blink.
MUTE key to enable a brief muting of the microphone for cough cut.
Output volume level can be adjusted throught the L/M/H switch
Multiple interpreter consoles can be interconnected in a daisy-chain

Central Control Unit TC-Z4
Basic functions
•In compliance with IEC60914 international standard
•With full digital audio technology, built-in high-speed CPU and high-performance DSP digital audio processor, CD sound quality.
•Supports 48KHz audio sample rate, acoustic frequency response can up to 20Hz~20KHz.
•Black tempered glass panel design, simple and high-end design. All the function divisions are clearly layout and easy to operate.
•The sever comes with built-in OLED panel to display system status, active mic, speaking mode.
•Language supports Chinese/ English. Russia, Spanish can be customized.
•Navigation knob for more convenient operation and management
•4 route port to connect conference units, the system has auto-repair function, support hot plug- and-play.
•One central control unit is able to accommodate 60-70 microphones. By cascading extension units,
•the system can support upto 4096 conference units.
•Universal voltage power switch for wider usable range and sufficient power supply.
•Support USB auto recording: after the front panel is inserted U disk, audio recording can be set automatically or manually. The recording status can be displayed in real time.
•Supports automatic video tracking (SD and HD), with preset panoramic position. Built-in 4×1 SD
•video matrix, to support SD video tracking without adding more device
•Input port for external audio signal: for alarm audio, PA, and other audio systems, the conference units can output audio signals synchronously.
•Internal clock and calendar, it will be displayed on central control unit, conference units.
•Built-in auto-detection fo conference units; before conferences, self-test can be run for each conference units.
•TCP/IP PC communication between central control unit and PC, which can achieve control
•management, remote fault diagnosis and remote update.

Stand-alone Mode Functions:
•ID number writing: the conference system supports automatically or manually assign ID to the corresponding equipment.
•All or individual units' VOX sensitivity are adjustable (apply to 5600 series)
•LCD screen contrast of Unit is adjustable (apply to 4200 series)
•Speaking mode: Operator, Auto, FIFO, VOX, request to speak (with software).
•VOX function: in VOX mode, the unit will be activated when user speaks; VOX sensitivity can be adjust by the server ( high, middle, low); microphone time-out is adjustable ( 6-180 seconds).
•1-4 delegate unit can be used simultaneously (except chairman unit); chairman/vice chairman unit are not subject to active mic limit, it's allowed to open at any time.
•The system can have multiple chairman units; delegate unit can be set as vice-chairman units. There are unlimited chairman and vice-chairman units.

Extended functions under PC and software control
•Register function and real-time participants statistics.
•Centralized conference management, operator can allow or reject delegate request to talk.
•Speaking time limit can be preset for conference units; After the speaking time is up, the conference unit will be off.
•Conference audio recording and video recording(need audio video capture card)

Based on functions of Central Control Unit TL-Z4, Central Control Unit TC-Z4 has functions below:
•Language interpretation: 1+5 channels.
•Acoustic frequency response can up to 20Hz~20KHz.
•With interpreter unit and language distribution port, it can connect Gonsin IR simultaneous
•interpretation system or FS-FHSS wireless simultaneous interpretation system for compatible use.